Best Practices

Spray ’N Lock MUST BE applied evenly and thoroughly around the area to be bonded. Both pipe and fitting must be saturated with product.

Spray both pipe and joint liberally. Gaps in coverage, missed or thinly covered areas will create a weak bond. Remember, the product must be completely covering the PVC material to break it down. Apply liberally and thoroughly, covering both pipe and fitting completely with product.

Both pipe and fitting must also fit together snugly (touching at all times). Improper, loose or misaligned connections will not provide the needed surface area for the product to work properly.

Note:  PVC Spray ’N Lock was designed to bond similar type PVC material. For best results, use the same type PVC material (PVC, CPVC, ABS or DWV) when bonding. Results may vary if dissimilar types are used. 

  • PVC to PVC
  • CPVC to CPVC
  • ABS to ABS
  • DWV to DWV